Ishida Model CW-90X Over/Under Checkweigher Washdown

• Piezo keypad consisting of ZERO, UNITS, PRINT, TARE, OVER, UNDER, ID, TARGET, ENTER, MENU, POWER
• 304 stainless steel, IP69K rated indicator
• Prevent breather vent
• Storage for up to 50 ID’s
• Unit of measure: kg, gm, lb, oz, lb/oz
• High-Intensity LED display
• Battery backed time and date
• Two full duplex RS-232 serial ports
• Configurable print formats
• Audit trail tracking
• Optional communications: Ethernet, USB or Fiber Optic
• Four configurable Digital I/O
• Reflash memory to upgrade firmware
Scale:
• IP69K, stainless steel hermetically sealed load cell
• 304 stainless steel
• Five point overload protection

POWER-AC:
Line voltages: 115/230 VAC
Frequency: 50/60 Hz
POWER CONSUMPTION:
1.5 A @ 115 VAC (8 W),
0.75 A @ 230 VAC (8 W)
EXCITATION VOLTAGE:
+5 VDC 8 x 350 Ω or
16 x 700 Ω load cells
ANALOG SIGNAL INPUT RANGE:
-0.5 mV/V – 4.5 mV/V
ANALOG SIGNAL SENSITIVITY:
0.3 uV/graduation minimum, 1.5 uV/
graduation recommended
MEASUREMENT RATE:
960, 480, 240, 120, 60, 30, 15, 7.5 per second
SYSTEM LINEARITY:
+/- 0.01% full scale
DIGITAL I/O:
4 channels on CPU board
CIRCUIT PROTECTION:
RFI, EMI, ESD protection
DISPLAY:
Large 0.8 in 14 segment, 6 digit high-intensity
red LED display
STATUS ANNUNCIATORS:
Designators for %, kg, gm, lb, oz, center of zero, G/B,
N, T, PT, neg, motion
OPERATING TEMPERATURE:
Legal: 14ºF to 104ºF
(-10ºC to +40ºC)
RATING/MATERIAL:
IP69K, stainless steel
DISPLAY RESOLUTION:
100,000 graduations maximum
LOAD CELL:
IP69K, stainless steel hermetically sealed
WARRANTY:
Three-year limited warranty
APPROVALS:
Indicator: NTEP CC 08-092, Class III/IIIL 10,000d
Measurement Canada AM-5710, Class III 10,000d
OIML R76/2006-GBI-10.02
TC GB-1385
TAC UK2900
UL and CUL listed
CE marked
Scale: NTEP CC 95-072, Class III 5,000d
Measurement Canada AM-5082, Class III 5,000d
NSF